Tools and Robot parts you need.
Awesome battery charger that is priced right.
Dremel The Most important tool.
Respirator Think -Paint fumes, fiberglass, metal dust. Protect yourself.
SHOP VAC Cleans up the mess and can be used in a Vacuform table.
Metal Epoxy glues metal together.
McMaster Carr, Bushings part#86555K252 (For aluminum wheels)
GRADE CE GAROLITE HOLLOW ROD, 1/2" OD X 1/4" ID,
40" LENGTH
McMaster Carr, #0 Screws (useful for bezel) McMaster Part # 90253a023
Speedbor
Drill bits. (You need the 1" and the 11/16" diameter bits to drill
holes for chest light.
Part # 8728k13. (Extruded acrylic square bar, 1/4" square,
6'length).
20 @1.05. With 8.71 shipping the total came to 29.71 (Collar)
Rockler, 17.5" LZ Susan part # 12451 (WAIST) OR
At www.leevalley.com you can purchase a bearing (absolutely
identical) to the rockler:
17-3/8" Lazy Susan Bearing 12K68.17 $ 43.20 (rocklers is $55.99)
Retail rubber boot (Lifter)
McMaster Carr,part#9744K3,@ $32.60.Cat #102
phone#(216)995-5500.it has a 1 13/16 I.D. at the top,and a 3''I.D.at the
bottom.O.D.at the bottom is 4 1/2.This boot will extend to 8'',and is 2'' collapsed.
It has 9 ribs.
bulbs
#258 (screw in 14 volt flashing) and the # 256 (same but bayonet). When I bought
them, the 258s were $8.99 for a box of ten and the 256 were $6.99 for a box
of ten.I spoke with Trish who is familiar with the robot club. Their number
is 410-823-0082.
1/2" thick x 2" wide x 36" long commercial grade neoprene rubber strips. Available through McMaster Carr Part number 8981K197 @$11.34 each- http://members.tripod.com/bobgreiner/id37.htm
Radio Shack part # 274-249 (Ideal female for powerpack)
( http://www.smallparts.com/ ) GBS-3232 (Brass Spur Gear, 32 Pitch, 32 Teeth).1"
Gears for claws.
Disc Sander (Useful in a 100 ways)
Primer (That etches into metal and fills scratches)
Tack Cloth Swipe that dust away before spray painting.
Power Supply. 10 amp 12 volts for bench testing.
Rotozip I used it to cut up the torso.
Rotozip circle attachment - Make circles up to 20 " diameter
BUTANE SOLDERING IRON AND TORCH
Laser Level Great for making straight holes and lines...for lights and dome panels.
Other useful parts are on the club site here.
What's New Media Files Home Mystery Island Con Photos Robot Parts Tutorials Robots in The News
